Home / Product / Indicator / Pocket indicator / DN120



      • The DN-120 has designed specifically to operate with strain gauge sensors such as Fast-measurement of Load cell, Pressure Transducer,LVDT, etc.
      • The setup sequence is simple and quick using four push buttons only. Quick sampling speed (100 times/sec).

      • Simple outdoor using in use of battery.
      • Using rechargeable battery.
      • High resolving power(16bit A/D)
      • High precision(more than 0.012% F.S) and stability.
      • Quick sampling speed (100 times/sec)
      • Peak hold function
      • Comparison function ; open collector output
      • Calibration of actual load and sensor output value
      • Auto zero function
      • Cutting size:92×92mm – Weight:about 500g
      • Option : RS232C(OP-01), RS485(OP-02), Comparison output (hi, Low)(Op-03), Peak/Sample Hold(OP-04), Back light(OP-05).


      Specifications Accuracy
      Application sensor Strain guage sensor
      Sensor adjustment range DC 5V
      Zero adjustment range 100% F.S (auto zero)
      Input signal 1.0, 1.5, 2, 3mV/V (Dip switch)
      Display 0000~±19999
      Display speed Approx 30times/sec (Adjustment available by buff setting)
      Character height 7Segment 15mm
      Decimal point Random setting available
      Sampling speed Max 100times/sec
      Zero variation within 0.01%/℃ (1mV/V)
      Sensitivity variation within 0.01%/℃
      Usage temperature range -10~60℃
      Humidity less than 80% RH (no des condensation)
      Power source used DC 7.2V Recharging battery DC 12V Adapter