Home / Product / Displacement Transducers / linear potentiometer / DN20W
DN20W
DN20W
- DN20W have designed specifically to operate with Voltage or?Current output sensors such as Pressure Transducer,potentionmeter etc. The setup sequence is simple and quick using four push buttons only.
- High resolving power (16bit A/D)
- High presision (more than 0.012% F.S) and stability
- Quick sampling speed (100times/sec)
- Built-in Shunt calibration switch
- Watch dog
- Small size(96*48*128mm) / Cutting size : 92*45mm
Dimensions
unit:mm
Specifications
| Specifications | Accuracy |
|---|---|
| Application sensor | Pressure sensor, Linear Pontentiometer(LPS, CTP) |
| Sensor authorized voltage(the number of Loadcell connection) | DC 10V, 24V (Dip switch) |
| Zero adjustment range | 100% F·S (Auto Zero) |
| Input signal | DC 0~5V, 0~10V, 4~20mA |
| Display | -19999~99999 |
| Display speed | Appox 30times/sec(Adjustment available by buff setting) |
| Character height | 7Segment 5 digit LED 14mm |
| Decimal point | Random setting available |
| A/D converter | 16bit, Max. 100 times/sec |
| D/A converter | 12bit |
| Zero variation | within 0.5mV/℃ |
| Sensitivity variation | within0.01%/℃ |
| Voltage output | DC 0~10V(4~20mA : in accordance with customer request) |
| Usage temperature range | -10℃ ~ 60℃ |
| Humidity | less than 80% RH (no dew condensation) |
| Power source used | 220V 50/60Hz (110V available by internal operation) |
| Relay output | Relay life time : more than 5,000,000 times |
| Network | RS-232C |
| Option | ㆍBCD Paralle out (OP-01) ㆍRS485 (OP-02) ㆍDAC ANALOG OUT (OP-03) |