Home / Product / Indicator / 2-4CH indicator / DN-300

DN-300

    DN-300

      • Show totals separately with 2ch indicator.
      • Left and right values and totals are displayed separately
      • Analog and contact outputs for each channel and sum individually.
      • Calibration method by actual load and calibration with rated output of sensor.
      • Watch dog
      • Display part and analogue zero by auto zero (DAC)
      • Analog out(DAC)
      • Relay output : Hi, Low, NG, OK.
      • Suitable for use with model RTB15

      OPTION
      Option No.2 RS232C serial interface (Standard installed)
      Option No.3 RS485 Multi drop interface
      Dimensions

      unit:mm

      Specifications
      Specifications Accuracy
      SIGNAL 1 ~ 3mV/V
      ANALOG OUT DC 0 ~ ±10V, (4 ~ 20mA option)
      EXCITATION 5V
      Available Sensors Strain gauge type sensor (bridge 120W, 350W, 700W)
      Max. Indication -19999 ~ +99999
      A/D Converter 24bit 1000 times/sec
      D/A Converter 16 bit
      Temp. ZERO 0.5μV/℃
      SPAN 0.01%/℃
      Indicator 7 segment  LED 14mm / 10mm
      Status LED Red LED 6 EA
      Key switch 4EA
      Communication RS232C (A + B)
      Comparison Output Hi, Lo
      Contact Capacity AC 250V 5A
      Temperature -10℃~ 60, 80% RH or less (no condensation)
      Weight About 600g
      Power supply AC 90 ~ 240V, 50/60㎐
      Outer Diameter 97 × 97 × 141 mm (W × H × D)
      Panel Cutting Size 92.5 × 92.5 mm