Home / Product / Indicator / Digital tachometer/rpm sensor maget type / MP-981

MP-981

    MP-981

      RPM processor/tachometer (frequency input). The setup sequence is simple and quick using four push buttons only.
      Dimensions

      unit:mm

      Specifications
      Specifications Accuracy
      Detection method Hall element
      Measurement range 1㎐~20㎑(using a 60P/R gear, 1~20,000r/min, with
      an output waveform duty cycle 50%±20%)
      Detection gear Strong magnetic materials
      Gap between detector and gear (modulus 0.5~3, tooth width 3 mm or greater)
      Power supply used DC 12V±2V(0.5Vp-p or less ripple)
      Current consumption 40mA or less(12V, at 25℃)
      Output waveform Lew level;±0.5V rectangular waveform(With no loac)
      Output impedance Approx. 330Ω
      Output type Floating groung
      Protective circuit Power supply polarity and output short protection
      Operating temperature range -10℃~+70℃
      Storage temperature range -20℃~+80℃
      Matching connector 6-pin connector(type R04-PB6F plug)
      Allowable vibration double-ended 1.2mm at 30㎐ in X, Y and Z direction
      (during-operation) for one hour each
      Allowable shock(non-operating) 490m/s2 in X and Y direction each 3 times
      Withstand voltage 1. DC250V, 1min.(between shield and signal cable)
      2. DC250V, 1min.(between shield and sensor head
      Interface indicator DN-30
      Weight Approx. 80g(including two mounting nuts)
      Accessories Mounting nuts(2)