Home / Product / Indicator / Digital weighing indicator / DN530N

DN530N

    DN530N

      • Application of Packer, Filler, Hopper, Checker, Limit Scale, etc.
      • Totaling function by Parts.(50 parts)
      • 2 Step Control (SP1, SP2)
      • 6 Control RELAY according to MODE
      • LIMIT, PACKER MODE: (SP1, SP2, FINISH, UNDER NG, OVER NG, ZERO)
      • CHECKER MODE 1, 2, 3 : (SP1[LOW], SP2[HIGH], OK, NG, ZERO)
      • RELAY OUTPUT MODE: LIMIT, PACKER, CHECKER
      • Improved A/D Conversion speed and resolution(Max. 200times, 1/520,000)

       

      Dimensions

      unit:mm

      Option
      • Analog Out-put (V-out) : 0~10V
      • Analog Out-put (I-out) : 4~20mA
      • Serial I / F : RS-422, RS-485
      • BCD In-put
      • BCD In-out
      • RS3232C and Current loop : Standard Installed
      Specifications
      Specifications Accuracy
      Load cell excitation 10VDC±5%, 320mA
      Input Signal 0.5 ~ 3.0mV/V
      A/D converting speed 200times/sec
      A/D converter resolution 1/520,000 counts(19bits), Δ∑
      Non-linearity 0.01% of full scale
      Zero adjustment range -0.6mV~42mV
      Display Unit 7 segment, 20.0mm(H)×13.0(W)mm
      Annunciator steady, zero, tare, Run, SP1, SP2, hold, Interface
      Decimal point position 0, 0.0, 0.00, 0.000
      Keyboard Number key and function key 12 PCS.
      Temperature-drift zero ±20PPM/℃, span ±20PPM/℃
      Non-linearity 0.01% of full scale
      Rear panel Loadcell input : 5pin connector
      External control : 12pin input terminal
      (zero, tare, tare reset/hold/print, gross/hold reset/subprint, Current loop,RS232C)
      control relay output : 7pin terminal
      Power SMPS Free Voltage (85V~265V)