Home / Product / Indicator / Digital weighing indicator / DN830

DN830

    DN830

      • Limit / Packer / Checker / Testing Application
      • 3pcs Control Relay built in
      • 1/8 Din Size (96(W) ø48mm(H))
      • Peak / Sample / Average Hold Function
      • Power : DC 24V
      • Rs-232C Serial Interface built in(Standard)

      Application
      Relay Mode
      Option
      Option No.1 RS-422
      Option No.2 RS-232 (Standard Installation)
      Option No.5 4~20mA (Analogue Output)
      Option No.6 0~10V (Analogue Output)
      Display Part
      Display Parts Specification
      Display Main Display 7Segments, 5 Digit RED FND Display
      Size :12.7mm(H)×7.3 mm(W)
      Min. Division ×1, ×2, ×5, ×10, ×20, ×50
      Max. display value 999,950
      Under Zero value “-” (Minus display)
      Status lamp Zero, Stable, Low, High, OK, Hold, Comm. Green LED Display(3Ø)
      Key Function Key Zero / F / Set / Enter (4pcs function keys)
      Specifications
      Specifications Accuracy
      Input Sensitivity 0.2㎶ / Digit
      Load Cell Excitation DC 10V ( – 5V ~ + 5V )
      Max. Signal Input Voltage Max.32mV
      Temperature Coefficient [Zero] ±10PPM/℃ / [Span] ±10PPM/℃
      Input Noise ±0.6㎶ P.P
      Input Impedance Over 10㏁
      A/D Conversion Method Sigma-Delta
      A/D Resolution(Internal) 520,000 Count(19bit)
      A/D Sampling Rate Max. 200times / Sec
      Non-Linearity 0.01% FS
      Display Resolution(External) 1/30,000
      Serial Interface (RS-232C) or Current Loop is Standard installed with 1 port.