Home / Product / Indicator / Digital weighing indicator / DN550N

DN550N

    DN550N

      • Application of Packer MULTIPLE Ingredient BATCHING SCALE, etc.
      • 2 Step Control (DRIB, FINAL)
      • 6 Control RELAY (FINAL, DRIB, FINISH, BATCH FINISH, ZERO)
      • RELAY output mode
      • 7PIN TERMINAL : FINAL, DRIB, FINISH, BATCH FINISH, ZERO
      • 25PIN CONNECTOR : 8PIN CONTROL
      • BCD INPUT : 25PIN CONNECTOR

      Dimensions

      unit:mm

      Applications

      unit:mm

      Option
      • Printer I/F : Centronics Parallel
      • Analod Out : V – out(0~10V)
      • Analod Out : I – out(4~20mA)
      • Serial I/F : RS 422, RS485
      • BCD Out-put
      Digital section
      Specifications Accuracy
      Display unit 12.7mm(1/2″), 7digits
      highly bright fluorescent tube
      sub display : 7segment 12digit Red-FND
      size : 9.2(H)x4.8(W)mmx1line
      Annunciators steady, zero, tare, gross, auto, print, hold
      Decimal point position 0, 0.0, 0.00, 0.000
      Keyboard ten key, zero, tare, tare reset, print, gross/net, grand total,
      sub total, parts, number, hold, reset, auto, code, s/n&enter
      DN510A : run, standby, sp1, sp2, sp3, sp4
      External input signal opical-isolator
      min. Division x1, x2, x5, x10, x20, x50
      max. Display +550,000
      Rear panel Loadcell input : 5pin connector
      Remote control : 5pin input terminal (start, stop, tare, tare reset, zero)
      BCD input : 37pin connector
      C ontrol relay : 7pin terminal (final, drib, finish, batch finish, zero)
      25pin : connector : 8pin control
      General
      Specifications Accuracy
      Data memory back-up appr. 10year
      Power 100/117/120/220/240V AC, ±10%, 50/60㎐ (factory preset)
      Power consumption appr. 30VA
      Operating condition temperature : -10~40℃ (14~104℉)
      humidity : 85% Rh Max. (non-condensing)
      Net weight 2.4kg
      Gross weight 3.1kg
      Physical dimensions (WxDxH) 200x175x105mm / (WxDxH) 7.87×6.89×4.33inch
      Fuse 250V/1A
      Specifications
      Specifications Accuracy
      Load cell excitation 10VDC±5%, 320mA
      Input Sensitivity 0.45㎶/D
      Zero adjustment range -0.6mV~42mV : combinations of 6bit dip switch
      Input voltage Max. 32mV
      impedance 10㏁ (Min.)
      noise 0.6㎶p.p or Less
      A/D converter type : dual slope type
      resolution : 1/65,000 counts(16bits)
      converting speed : 20times/sec
      Non-linearity 0.01% of full scale
      Temperature-drift zero ±20PPM/℃
      span ±20PPM/℃
      Overload tolerance 10% of full capacity
      Display update rate 20 times/sec