Home / Product / Indicator / Digital weighing indicator / DN511A
DN511A
DN511A
- Multi-Functional Control purpose Indicator
- – Packer, Limit weighing modes
- 1.0 inch Red FND Display
- 4 Section Multi-Calibration–
- A/D Sampling : 80times/sec
- 4pcs Control Relay buitl in – 4 set points (Low, High, Finish, Zero)
- Free Fall setting for Low/High Set Value
- Rs-232C Serial Interface built in(Standard)
- Display Resolution : 1/30,000
- Part No. Memory, Max.99
- Serial Interface Max. 4pcs
- Current Loop 1port standard built in
- Trans type Power Supply – AV110/220V (Dip S/W selectable)
Option
- 0~10V (Analogue Output)
- 4~20mA (Analogue Output)
- RS422/485(Serial interface)
Display Part
| Display | Parts | Specification |
|---|---|---|
| Display | Main Display | 7Segments, 6 Digit RED FND Display |
| Size :25.4mm(H)×14.4mm(W) | ||
| Min. Division | ×1, ×2, ×5, ×10, ×20, ×50 | |
| Max. display value | 999,950 | |
| Under Zero value | “-” (Minus display) | |
| Status lamp | Steady, Zero, Print, Gross, Auto, g, kg, ton, Tare, RTxD | Green color Condition display Lamp (10pcs) |
| Key | Number, Function Key | Number Key, Function (12pcs) |
Specifications
| Specifications | Accuracy |
|---|---|
| Input Sensitivity | 0.45㎶ / Digit |
| Load Cell Excitation | DC 10V ( – 5V ~ + 5V ) |
| Max. Signal Input Voltage | Max.32mV |
| Temperature Coefficient | [Zero] ±20PPM/℃ / [Span] ±20PPM/℃ |
| Input Noise | ±0.6㎶ P.P |
| Input Impedance | Over 10㏁ |
| A/D Conversion Method | Sigma-Delta |
| A/D Resolution(Internal) | 260,000 Count(19bit) |
| A/D Sampling Rate | Max. 80times / Sec |
| Non-Linearity | 0.01% FS |
| Display Resolution(External) | 1/30,000 |