Home / Product / Indicator / Digital weighing indicator / DN500N



      • Platform scale, Truck scale,
      • Tension/compression tester, Horse weigher,etc.
      • 50 kind of parts number can be memorized
      • Watch-dog function installed for diagnostics
      • Data back up against power stoppage.
      • Front display window covered by lexan film for the protecting of dust
      • Weighing judgment by over & under setting when printer is connected
      • Three kinds of hold function (peak-hold and averagehold, auto-hold)
      • Can drive up to 8pcs of load cell (350.)
      • RS-232C and CURRENT LOOP standard installed



      • Analog Out-put (V-out) : 0~10V
      • Analog Out-put (I-out) : 4~20mA
      • Serial I / F : RS-422, RS-485
      • BCD In-put
      • BCD In-out
      Specifications Accuracy
      Load cell excitation 10VDC±5%, 320mA
      Input Signal 0.5 ~ 3.0mV/V
      A/D converting speed 200times/sec
      A/D converter resolution 1/520,000 counts(19bits), Δ∑
      Non-linearity 0.01% of full scale
      Zero adjustment range -0.6mV~42mV
      Display Unit 7 segment, 20.0mm(H)×13.0(W)mm
      Annunciator steady, zero, tare, gross, auto, print, hold,Interface
      Decimal point position 0, 0.0, 0.00, 0.000
      Keyboard Number key and function key 16 PCS.
      Temperature-drift zero ±20PPM/℃, span ±20PPM/℃
      Non-linearity 0.01% of full scale
      Rear panel Loadcell input : 5pin connector
      External control : 12pin input terminal
      (zero, tare,tare reset/hold/print, gross/hold reset/subprint,Current loop, RS232C)
      Power SMPS Free Voltage (85V~265V)