Home / Product / Force Gauge / DN-FGA

DN-FGA

    DN-FGA

      • High resolution, simple measurement of tension/compression force, switch test, connector insertion/withdraw test, fracture test and push pull testing equipment

       

      Features

      · Indication of Measuring Unit: Kgf, N, lbf, ozf
      · A/D Transducer: 16-bit, 100 times/sec
      · D/A Transducer: 12-bit
      · Indication of Measuring Value: 5 Digit LCD (indicating forward/reverse direction)
      · Condition indicating LED: Indication of charge and compare output condition
      · Compare Output: High, Low, Good
      · Analog Output: DC +/-1V
      · Communication Output: USB
      · Range of using temperature: -10℃ to 40℃, 80% RH and below (in locations without due condensation phenomenon)
      · Weight: Approximately 600g
      · Electric Source: Nickel hydrogen (NimH), Chargeable Adapter (DC 9V)
      · Continuous Use Life: Approximately 40 hours
      · Charging Time: Approximately 8 hours
      · Option OP-01: USB cable, OP-02 :Analog out and open collector connector.

      DIMENSIONS
      FGA-K500 ~ T1
      MANUAL TEST STAND
      Specifications
      Model FGA-K2 FGA-K5 FGA-K20 FGA-K50 FGA-K100 FGA-K500 FGA-T1
      Capacity 2.000kg 5.000kg 20.00kg 50.00kg 100.00kg 500.0kg 1000.0kg
      Min load 0.001kg 0.001kg 0.01kg 0.01kg 0.05kg 0.1kg 0.5kg
      Sensor conformation Sensor Inside Sensor Inside
      Value error ±0.2%

      FGA USB Driver : CP2102 usb to uart bridge controller