Home / Product / Indicator / Digital indicator / DN10W, DN15W

DN10W, DN15W

    DN10W, DN15W

      • The product have designed specifically to operate with strain gauge sensors such as Fast- measurement of Load cell, Pressure Transducer, LVDT, etc. The setup sequence is simple and quick using four push buttons only.
      • High resolving power (16bit A/D)
      • High presision (more than 0.012% F.S) and stability
      • Quick sampling speed (100times/sec)
      • Built-in Shunt calibration switch
      • Watch dog
      • Small size(96*48*128mm) / Cutting size : 92*45mm
      • Weight : about 700g
      • Option: Power Input 24V in accordance with customer request



      Specifications Accuracy
      DN15W DN10W
      Application sensor Strain guage sensor (350Ω or 700Ω)
      Sensor authorized voltage
      (the number of Loadcell connection)
      DC 5V, Loadcell(350Ω) available 4
      Zero adjustment range 100% F·S (Auto Zero)
      Input signal 0.5 ~ 3mV/V
      Display -19999~99999
      Display speed Appox 30times/sec(Adjustment available by buff setting)
      Character height 7Segment 5 digit LED 14mm
      Decimal point Random setting available
      A/D converter 16bit, Max. 100 times/sec
      D/A converter 12bit
      Zero variation within 0.5μV/℃
      Sensitivity variation within0.01%/℃
      Voltage output DC 0~10V (4~20mA : in accordance with customer request)
      Usage temperature range -10℃ ~ 60℃
      Humidity less than 80% RH (no dew condensation)
      Power source used 220V 50/60Hz
      (110V available by internal operation)
      220V 50/60Hz
      (110V available by internal operation)
      Relay output ㆍUpper and lower limit comparison output
      ㆍ4 relay output
      ㆍContact capacity : AC 250V 5A
      ㆍRelay life time : more than 5,000,000times
      Network RS-232C
      Option ㆍBCD Paralle out (OP-01)
      ㆍRS485 (OP-02)
      ㆍDAC ANALOG OUT (OP-03)