Home / Product / Data logger / DL-360

DL-360

    DL-360

      This data logger is 16 channels dynamic strain measurement equipment which connect with PC and display graph and
      record data. Strain can be measured after strain gage is wired, and strain gauge type sensors as like load cell, pressure sensor, and torque sensor, LVDT and potentiometer, RTD and thmocouple, and voltage tye sensor can be measured.
      Feature
      • Max. 16 channel dynamic data logger.
      • Real-time measurement by USB port
      • 4 channels per slot type
      • 1kHz frequency measurement by each channel
      • Built-in 120Ω, 350Ω bridge circuit
      • Remove noise by low pass filter.
      • 16bit, 200kHz high efficient A/D converter
      • 1gage 3wire type, 2gage, 4gage bridge can be connected.
      • Selectable both Tajimi or 5p Screw connector
      Specifications
      Model GTDL-360
      Number of Channel 4, 8, 12, 16, 20, 24, 28, 32, 36, 40 channel
      Measure Hz 1000Hz
      Connector for sensor 5p Screw connector or TAJIMI
      Input Sensor

      – 1Gage & 2Gage : 120Ω, 350Ω

      – 4Gage Bridge Sensor : 0.5 mV/V ~ 100mV/V

      – Potentionmeter Sensor

      – Voltage : 10V
      Strain Input Range 10000, 100000, 1000000 X 10-6 strain
      Low Pass Filter 10Hz, 100Hz, 1Khz, Pass Program Selectable
      Interface USB
      Program Multiscan S/W & Multiload S/W
      Demension 260(W)*190(H)*270(D)mm
      Power AC220V, 50~60Hz
      Layout