Home / Product / Data logger / Data logger / SA-16

SA-16

    SA-16

      This amplifier has strain measurement and analog output function and more various functions and easy operationby built-in 5.6″ TFT screen. Various signals from sensors are inputted and carry out an operation and indicate them to LCD screen and output analog signal ±10V.
      Feature
      • Real data value and out voltage can be checked.
      • Kind of sensor, sensor spec, deciaml points can be setted by touch screen.
      • No need bridge box by Built-in 120Ω, 350Ω bridge circuit.
      • 19″ rack (3U) can be intalled.
      • D/A offset and D/A span can be setted.
      • 2channels per slot type
      • Use both roud type connector or 5p Screw connector
      Dimensions
      Specifications
      Model SA-16
      Number of Channel 2, 4, 6, 8, 10, 12, 14, 16 channel
      Display 5.6 inch TFT Touch LCD
      Measure Hz 10Hz
      Analog Output Hz 10Hz
      Connector for sensor 5p Screw connector or TAJIMI
      Input Sensor
      • 1Gage & 2Gage : 120Ω, 350Ω
      • 4Gage Bridge Sensor : 0.5 mV/V ~ 100mV/V
      • Potentionmeter Sensor
      • Voltage : 10V
      Strain Input Range 10000, 100000, 1000000 X 10-6 strain
      Low Pass Filter 10Hz, 100Hz, 1Khz, 10Khz
      Bridge EXC Voltage 2Volt, 5Volt, 10Volt
      A/D Convertion 16Bit 10,000times/sec.
      D/A Convertion 16Bit 10,000times/sec.
      Demension 450(W)*132(H)*280(D)mm, 19″ Rack 3U SIZE
      Power AC220V 50~60Hz