Home / Product / Amplifier / Dynamic strain amplifier / DN-CN100



      As signal conditioner, it was designed and manufactured to be suitable for instrumentation control panel. It is used for potentiometer, and signal converter DC voltage output transducer.

      • Built-in single step filtering function
      • Easy to adjust zero and span by volume
      • Frequency response DC~10kHz



      Specifications Accuracy
      Bridge Voltage DC 10V, ±15V
      Potentiometer resistance 1㏀ ~ 100㏀
      Rated output Voltage 10V (Load resistance more than 200Ω)
      Current 4~20㎃ (Load resistance less than 300Ω)
      Zero adjustment ranger 20%, 10 rotations
      Sensitivity adjustment range 20%, 10 rotations
      Frequency response DC ~ 10㎑ (-3㏈)
      Low Pass Filter 10㎐, 100㎐, 1㎑, Pass
      Non-linearity 0.02% F.S
      Usage temperature range -10 ~ 60℃
      Humidity Less than 80% RH (No dew condensation)
      Voltage AC 220V 50/60㎐ (AC 110V available by internal operation)
      Specifications are subiect to change without notice.