Home / Product / Data logger / GTDL-152

GTDL-152

    GTDL-152

      This data logger is 4-6 channels dynamic & static strain measurement equipment which can monitor result and record data without PC by built-in touch screen and SD memory card. This data logger can be measured for static without PC because of has built-in SD memory and touch screen. Strain measured after strain gage is wired, and strain gauge type sensors as like load cell, pressure sensor, torque sensor, LVDT and can be potentiometer, etc can be measured. The data can be transmited to PC easy through the front side USB port.
      Feature
      • 4-6 channels static & dynamic data logger.
      • Multi functions with touch screen and bult-in data memory
      • Built-in 120Ω, 350Ω bridge circuit
      • Remove noise by low pass filter.
      • Auto zero by auto zero button
      • 1gage 3wire type, 2gage, 4gage bridge can be connected.
      • Use both Tajimi and 5p Screw connector
      • Small size, light weight and USB interface
      Specifications
      Model GTDL-152
      Number of Channel 4 Channels
      Display & Data Memory

      5.6″ TFT Touch LCD

      4G SD Data Memory , USB Memory Stick Port (EXT)
      Measure Hz 1000 Hz
      Connector for sensor 5p Screw connector & TAJIMI
      Input Sensor

      – 1Gage & 2Gage : 120Ω , 350Ω

      – 4Gage Bridge Sensor : 0.5 mV/V ~ 100mV/V

      – Potentionmeter Sensor

      – Pt100 RTD

      – Voltage : 10V
      Strain Input Range 10000, 100000, 1000000 X 10-6 strain
      Low Pass Filter 10Hz, 100Hz, 1Khz, Pass
      Interface USB
      Program Multiscan S/W & Multiload S/W
      Demension 40(W)*190(H)*270(D)mm
      Power AC220V, 50~60Hz